--- title: "Adding a Bridging Beam" slug: "adding-a-bridging-beam" updated: 2026-11-19T16:57:30Z published: 2026-11-19T16:57:30Z canonical: "docs.avontus.com/adding-a-bridging-beam" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.avontus.com/llms.txt > Use this file to discover all available pages before exploring further. # Adding a Bridging Beam You can add a bridging beam to a drawing by modifying a Bay. Bridging Beams are similar to Ladder Beams, but a Bridging Beam will fill the space perfectly, while a Ladder beam will clamp on to the Scaffold. To add a Bridging Beam: 1. Drag in a Bay ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-PPUIZI74.png) 1. Select the Bay, and click **Add Level.** ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-4OO0AKXT.png) 1. Click **Add Bay To R** side to add three more Bays. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-LCLRLPQL.png) We now have our Scaffold. 1. Select a Bay, and drag it out. This will be our deck, and we will modify this later. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-YPZ1ECDZ.png) 1. Select the second Bay. 2. Click the **TB** drop-down, and select the appropriate Bay size. This will be our Beam. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-M8TO027M.png) 1. Select the beam, and in the **Bay Level Editor** unplank the top level 2. Skip the bottom two levels. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-JASCD4S1.png) The **Bay Level Editor** should look like this: ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-9PIX7UNB.png) We should now be left with the beam only. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-YAVOEPRP.png) 1. Next, select the Bay we dragged out earlier, and remove the bottom two levels in the **Bay Level Editor**. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-GHTDE285.png) 2. With the Bay still selected, click **Side Settings** and remove the **Screwjacks**. 3. Click **OK** ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-ZX5F9OWM.png) We will now have a single bay. The Bay will be our deck, allowing scaffold users to walk across the scaffold. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-52PZ9N3R.png) 4. Click and drag the Bay/Deck to the Beam. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-6M1JAQN8.png) 13. With the Bay/Beam selected, click to add a Bay to the right. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-KNM1D2CH.png) Your Bridging Beam will be complete. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-EZ8PN16P.png)