---
title: "Applying Bearer Settings"
slug: "applying-bearer-settings"
updated: 2026-03-18T13:35:34Z
published: 2026-03-18T13:35:34Z
canonical: "docs.avontus.com/applying-bearer-settings"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.avontus.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Applying Bearer Settings

You can apply Bearer Settings to a bay with a simple click. These Bearer Settings are either specified in the [Global Options](https://docs.avontus.com/v1/docs/en/adding-a-bearer-threshold) or the [Drawing Options](https://docs.avontus.com/docs/drawing-options).

You can find more information on Bearer Threshold here - [https://www.youtube.com/watch?v=MXz7gcz2hqo&ab_channel=AvontusSoftware](https://www.youtube.com/watch?v=MXz7gcz2hqo&ab_channel=AvontusSoftware)

To apply Bearer Settings

1. Select a Bay
2. In the **Scaffold** tab, select **Apply Bearer Settings** ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/apply%20bearers%20settings.gif)

If you do not have Bearer settings enabled, you will receive the following error message, when you click Apply Bearer Settings. ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-P1WLKXAS.png)