---
title: "Applying Planking Options to a Drawing"
slug: "applying-planking-options-to-a-drawing"
updated: 2026-04-24T08:56:46Z
published: 2026-04-24T08:56:46Z
canonical: "docs.avontus.com/applying-planking-options-to-a-drawing"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.avontus.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Applying Planking Options to a Drawing

You can apply Planking options to all bays in a drawing rather than just on specific Bays.

All the options in the respective drop-downs are what’s in your material master.

To do this

1. In the **Home** tab, select **Drawing Options**

![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-SK64F549.png)

1. In the **Planking** selection, specify the Bay Type ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-D9U7OZXN.png)
2. Select the **Material**
3. Select the **Manufacturer**
4. Set the **Width**
5. Click **Apply**

![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-P63Q8CP1.png)