---
title: "Cantilever Stair Landings"
slug: "cantilever-stair-landings"
updated: 2026-04-21T09:09:20Z
published: 2026-04-21T09:09:20Z
canonical: "docs.avontus.com/cantilever-stair-landings"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.avontus.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Cantilever Stair Landings

Cantilever Landings can be added to a staircase

1. Click **Structures** and select to drag in a **StairTower**
2. Select the **StairTower** type and the **Stairway material**
3. Click **OK** ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/stair%20tower%201.gif)
4. Select a bay and convert it to a connector bay by selecting **To Connector Bay** in the **Scaffold** tab
5. Click **Yes** to covert the bay to a Connector bay
6. Collapse the bay by dragging one corner to the other ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/starir%20tower%202.gif)
7. Repeat this for the other corner ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/stair%20tower%203.gif)
8. Select **Side Settings** on the right bay
9. Enable **Catilevers/Brackets** on the right-hand side of the Connector Bay
10. Select the **Material** type if required,
11. Click **OK**

![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/stair%20tower%204.gif)

We can view our model to see the changes we have just made
12. Select the left bay
13. Select to enable Cantilevers/Brackets on the left hand side,
14. Set the **Material** if required
15. Click **OK**

![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/stair%20tower%206.gif)

We can now see our Stair Tower with Cantilever landings on both sides ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/835aefb6-fe4b-4175-8987-e93278532201.png) We can then remove the bottom Cantilever, to do this
16. Select **Conceptual**
17. Select the Bay, then select **Delete Bays**

![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/stair%20tower%207.gif)

The bottom Cantilever will be removed ![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/326f6e2c-6ee4-42fc-af6c-b6dd32484a8f.png)