---
title: "Configuring Formwork for Slab Corners"
slug: "configuring-formwork-for-slab-corners"
updated: 2023-08-04T12:07:28Z
published: 2023-08-04T12:07:28Z
canonical: "docs.avontus.com/configuring-formwork-for-slab-corners"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.avontus.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configuring Formwork for Slab Corners

Handset Designer provides two options for forming corners with Slab edges: standard outside corner angles (OC) or footing corner brackets (FCB). Handset Designer uses Standard Outside Corner by default. You can change the default setting to use Footing Corner Bracket instead.

To configure the Slab corners:

1. Click **Formwork Options** in the **Handset Designer** ribbon.![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/ee1c7b2f-8df7-43f8-a263-5dcd7d92fd97.png)The *Formwork Options* dialog opens.
2. Click the **Formwork Design** Tab.
3. Click the **Use footing corner bracket** checkbox.  
**![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/f93add5a-21aa-4fe9-9ba0-1c90a0284625.png)**
4. Click **OK**.  
When you draw Formwork, the notations show which type of corner Handset Designer has configured: Standard Outside Corners or Footing Corner Brackets.  
![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/2982e752-6533-4b97-87ac-837fe9941781.png)![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/98aac167-ded5-42c8-8288-181f7442090f.png)