---
title: "Editing a Controller Dimension in Handset Designer"
slug: "editing-a-controller-dimension-in-handset-designer"
updated: 2023-08-04T12:13:24Z
published: 2023-08-04T12:13:24Z
canonical: "docs.avontus.com/editing-a-controller-dimension-in-handset-designer"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.avontus.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Editing a Controller Dimension in Handset Designer

The **Controller Dimension** is a smartshape that takes advantage of being glued to another shape. When you glue a Controller Dimension to the endpoints of a wall, you can change the Dimension text (double-click on the Dimension) to a new value. The wall will then changes length to match the Dimension.

To edit a Controller Dimension:

1. Locate the Controller Dimension you want to edit and double-click its linear measurement.  
![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/7be456bb-a8ba-4aa9-b72d-27805e9f0382.png)  
The measurement becomes editable.
2. Enter a new measurement.  
![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/bb4aad28-41ea-49f7-bfb6-306379bdd519.png)
3. Click anywhere in the Drawing Page.  
The drawing shape changes its length to match the measurement you entered.  
![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/81f81e2f-95d5-4838-b4ef-f249f361f9e0.png)