---
title: "Placing a Connector Bay Between Two Standard Bays"
slug: "placing-a-connector-bay-between-two-standard-bays"
updated: 2026-04-24T08:56:56Z
published: 2026-04-24T08:56:56Z
canonical: "docs.avontus.com/placing-a-connector-bay-between-two-standard-bays"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.avontus.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Placing a Connector Bay Between Two Standard Bays

Use Connector Bays for filling irregular spaces between Standard Bays, on structures such as irregular angles, curved walls or tanks.

To add a Connector Bay between two Standard Bays:

1. Start by placing Standard Bays at the desired angle.

![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-XZ1BILH8.png)
2. Drag and drop a Connector Bay near the two Standard Bays.

![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/image-DW999AE2.png)
3. Select the Connector Bay.
4. Click and drag the first Connector Bay node to the desired Standard Bay node.

> **Note:** When hovering over the Standard Bay node, it will turn green, indicating it is [ready to glue](/v1/docs/getting-started-with-avontus-designer).
5. Repeat for each of the other Connector Bay nodes:

![](https://cdn.document360.io/ae69c864-58f0-4711-91e1-d1c2f7dff95f/Images/Documentation/drag.gif)

The Connector Bay lines up with and connects the two Standard Bays.