...

When you are in a pinch and you need and an extra ledger for a scaffold, use a Beam.

...

9. Change the color to match the bay.

a. Right-click the and select **Format Shape** from the menu that appears.

...

A positive number for this angle results in a cone that expands out from the base. The draft angle is measured from one side of the base of a cone created with a positive number (above), with a line drawn straight up and another along the side of the cone. The vertical cone in the image to the right has a base of .25 meters, a height of three meters, and an angle of 30 degrees. The draft angle is shown as that angle drawn from the vertical line and the side of the cone. | |

Cones with negative draft angles start with the base and simply taper up the length of the cone to a point. The vertical cone in the image to the right also has a base of .25 meters, a height of three meters. However, it has an angle of -30 degrees. |

...

6. Click in the **Start Elevation** text text field and enter the elevation of the base of the cone.

7. Click in the **End Elevation** text field and enter the end elevation of the cone.

...